BSA Empire Star

BSA Empire Star


BSA Empire Star
BSA Empire Star 500 cc 1936.jpg
Manufacturer United Kingdom BSA
Production 1936-1939
Engine 249, 348 and 499cc single cylinder 4 stroke
Transmission 4 Speed / chain
The BSA Empire Star was a British motorcycle made by BSA at their factory in Small Heath, Birmingham. Named to commemorate the Siver Jubilee of King George V of the United Kingdom and advertised as The Masterpiece of the Industry, the Empire Star range was produced between 1936 and 1939, when it was developed into the BSA Gold Star and World War II stopped production.

Development

Developed from the popular BSA Blue Star and designed by Val Page, the Empire Star range had the benefit several ideas Page had been developing at his previous employers, Ariel and Triumph motorcycles. With a heavy frame and iron barrelled pushrod valves the Empire Star still had the legacy of the earlier BSA's however, and Page continiued to lighten it and introduce engine tuning ideas throughout production.
The overhead valve Empire Star was available as the 250cc 'B22', the 350cc 'R5' and the 500cc 'Q8' models. Based on the standard BSA Blue Star the 'Empire' featured an alloy primary chaincase with a special high compression piston and a hardened cylinder bore.  It also had some modern features, including a new foot-change gearbox and dry sump lubrication.
BSA launched the range of Empire Star models in 1936 with an effective demonstration of their reliability - a 500cc model was subjected to an endurance test of 500 miles at Brooklands, averaging speeds of over 70 mph round the oval track. This was followed by a 1000 mile endurance ride around the UK, visiting the West Country, Wales and the Lake District. The whole trip was completed successfully without the need for any spare parts - an important selling point for BSA in an increasingly competitive marketplace.
The outbreak of the second world war ended production of the Empire Star in 1939 as the BSA factory switched to making munitions and producing the BSA M20 for the British Army.

Racing success
It was the top of the range 496cc Empire Star, which saw most success in competition. In 1937 at Brooklands race track, Isle of Man TT winner Walter Handley won a race with a fastest lap at 107.57 mph on a specially modified 500cc Empire Star with a high compression piston and using alcohol as fuel. It also had a special racing carburettor, a new design of magneto and close ratio gearin. Handley had been persuaded out of 'retirement' especially for the three-lap race, which meant eight miles at top speed on the uneven and deteriorating banked oval track. It took skill and experience to win, and Handley was awarded one of the traditional Gold Star badges. This inspired BSA to develop the BSA Gold Star.
Also in 1937 BSA competition team rider Bert Perrigo won both the Colmore Cup and Victory Cup trials on a B25 Empire Star.

Popular posts from this blog

Honda CHF50

Image
The CHF50 is a scooter manufactured by Honda. It is known as the Metropolitan in the United States, the Jazz in Canada, the Scoopy in Australia and the Crea Scoopy in Japan. The 2002-05 models can reach a speed of 38-40 mph (61-65 km/h) at 8,000 rpm whereas 2006 and later models can reach 43 mph (69 km/h) at 8,850rpm. Power is rated between 4 and 4.9 hp. The Metropolitan has typical gas mileage of 80–110 mpg (US) (2.1–2.9 L/100 km). Design Concept While the CHF50 is one of several 49 cc scooters offered by Honda since the early 1960s, it is notable for its "classic" Vespa-inspired styling and modern mechanical parts. In the United States, it debuted as the Metropolitan in model year 2002. The CHF50 has a large lockable center compartment, located below the seat, which can hold a helmet with room to spare. Inside the compartment is a handle to lock the center stand. This makes it more difficult to roll away. It also features locking handle bars which can lock the wheel
Read more

Vespa

Image
Post World War II Italy, in light of its agreement to cessation of war activities with the Allies, had its aircraft industry severely restricted in both capability and capacity. Vespa is an Italian brand of scooter manufactured by Piaggio. The Vespa has evolved from a single model motor scooter manufactured in 1946 by Piaggio & Co. S.p.A. of Pontedera, Italy—to a full line of scooters and one of seven companies today owned by Piaggio—now Europe's largest manufacturer of two-wheeled vehicles and the world's fourth largest motorcycle manufacturer by unit sales. From their inception, Vespa scooters have been known for their painted, pressed steel unibody which combines a complete cowling for the engine (enclosing the engine mechanism and concealing dirt or grease), a flat floorboard (providing foot protection), and a prominent front fairing (providing wind protection) into a structural unit. The Vespa was the first globally successful scooter. History Piaggio emerged
Read more

Triumph Rocket III

Image
Triumph Rocket III Classic Motorcycle The Triumph Rocket III is a British motorcycle made by the Hinckley Triumph factory and has the largest displacement engine of any mass production motorcycle, (as of September 2010[update], at 2,294 cc (140.0 cu in). History The Rocket III Project started in 1998 led by Triumph Product Range Manager Ross Clifford and started with a lot of research—especially in the USA where big cruisers were selling well. The main competitors were the Harley-Davidson Ultraglide and the Honda Goldwing so the initial idea was to develop a 1,600 cc performance cruiser. The in-house designer was John Mockett, designer of the Hesketh V1000, the Tiger and the new 'nostalgia' Bonneville. He started work with David Stride, Gareth Davies and Rod Scivyer working around an in-line three cylinder engine. At the start of the project in-line four and a V6 engine configurations were looked at but the longitudinally mounted triple design led to the design concept
Read more